Epson Action Laser II - Manual (Page 205)

Initialization
Default settings in LQ and FX emulation modes
Item
Paper input
Paper size
Page length
Top of form
Left margin
Right margin
Horizontal tab
settings
Vertical tab
settings
VFU channel
Character
spacing
International
character set
Factory Reset
Auto
Letter
62 lines
0.5 inch
Left edge of the
printable area.
80 columns (10 cpi)
Every eight characters.
(The character width is
10 cpi.)
Every 1/6 inch
Channel 0
10cpi
USA
Reset
SelecType setting
SelecType setting
Depends on the paper size
and orientation settings.
SelecType setting
SelecType setting or left
edge of the printable area.
Depends on the default right
margin set with SelecType.
Every eight characters. (The
character width depends on
the SelecType condensed
print menu setting.)
Every 1/6 inch
Channel 0
Depends on the condensed
print menu setting.
SelecType setting
Typeface
Proportional
spacing
Character
table (ESC t)
Condensed
Skip bottom
Courier SelecType setting
Fixed SelecType setting
On (ESC t1) SelecType setting
off SelecType setting
Disable SelecType setting
8-22 Technical Specifications