Epson Action Laser II - Manual (Page 88)

SelecType Options
AUTOFEED OFF
ON
* OFF
When this option is set to off, the AUTOFEED signal on pin 14 is
ignored and the printer does not send an automatic line feed (LF)
command with each carriage return (CR). When AUTOFEED is set
to on, a line feed is added to each carriage return the printer receives.
If your text lines overprint each other, you may need to set
AUTOFEED to on.
BUSY DELAY 0
- 5
*0
+5
MIN
This option sets the delay period from the ACKNLG to the BUSY
signal. Available settings are 0, -5, +5 microseconds, and MIN. For
most applications, leave this option set to the factory setting of 0
microseconds. When you select MIN, the ACKNLG signal is always
set to HIGH.
The serial channel has the following submenus:
WORD LENGTH
BAUDRATE
PARITY
STOP BIT
DTR
XON/XOFF
ENQ/ACK
DSR
CTS
4-24 SelecType