Emulex DCP_link - Manual (Page 91)

6-14 Chapter 6
NOTE: Most installations can function properly with the
factory default parameters. For non-standard
applications, refer to the Novell NetWare MPR
3.0 Advanced Configuration and Management
Guide.
Binding Network Protocols to a WAN Interface
After adding and configuring the desired protocols outlined above, complete
the following steps to bind a given protocol, such as IPX, to the WAN
interface and to select a permanent WAN Call Destination (if applicable):
1) From the Internetworking Configuration menu, select Bindings then
press .
Figure 6-10 Internetworking Configuration
2) A new window displays a list of the Configured Protocol To Network
Interface Bindings.
Figure 6-11 Configured Protocol to Bindings
3) Press to display a list of the configured protocols.