Emulex DCP_link - Manual (Page 115)

7-22 Chapter 7
Expert Call Configuration
1) If Circuit Type is Switched Virtual Circuit, press to view or
modify the Expert Call Configuration parameters.
Figure 8-9 X.25 Expert Call Configuration
The X.25 Expert Call Configuration window is displayed. The
parameters in this window are applicable only to SVC’s.
The Call Destination Name field is a read-only field displaying the
name of the WAN Call Destination entered in Step 4.
2) In the Request Reverse Charging field, accept the default value No, or
press to change it.
3) In the Fast Select field, accept the default value, No , or press to
change it.
4) If Fast Select has been enabled, the With Restriction field can be
selected. Accept the default value, No , or, press to change it.
5) In the Call User Data field, accept the default value, None , or press
to change it.
6) In the Generic CCITT Facilities Entry field, accept the default value, or
press to change it.
7) In the Generic National Facilities field, accept the default value, or press
to change it.
8) In the Suppress Calling DTE Address field, accept the default value, or
press to change it.
9) When you have completed all changes to the X.25 Expert Call
Configuration parameters, press to return to the X.25 Call
Destination Configuration window.