Emulex DCP_link - Manual (Page 72)

Software Configuration 5-3
Boards - Determines which LAN and WAN boards are used in
the server or router. This option allows you to add new boards,
modify the hardware parameters associated with the boards,
enable or disable configured boards, or delete boards.
Network Interfaces - Allows you to configure media-specific
Data-Link layer parameters for each interface of a WAN board.
LAN drivers require no further configuration.
WAN Call Directory - Specifies parameters required to establish
and maintain a WAN connection to a given destination for all
protocols.
Protocols - Specifies global parameters for Network-layer
protocols.
Bindings - Enables a selected network protocol or bridge frame
to be routed across a particular LAN or WAN interface.
Manage Configuration - Enables you to perform the following
tasks:
− Configure SNMP parameters.
− Export/import configuration information to or from a disk.
− Configure remote access to this server.
− Edit the AUTOEXEC.NCF file.
View Configuration - Enables you to view the following
information:
− All LOAD and BIND commands.
− LAN adapter LOAD and BIND commands.
− WAN adapter LOAD and BIND commands.
− Protocol commands.
− Board interface and protocol binding information in a matrix
format. The summary can be saved to a file.
− Console messages captured during system restart or
generated by the loaded modules.
The bottom line of each INETCFG screen shows the command keys
that can be used on that screen and the action that the key performs.
These keys are.