Emulex DCP_link - Manual (Page 69)

Software Installation 4-9
6) Select Driver Options from the Installation Options menu, select
Configure the Network Drivers and press .
7) Using arrow keys, highlight Deselect a Selected Driver and press
.
8) Use the arrow keys to select the EMXMLID driver and press or
to remove it.
9) Return to the Installation Options menu and select Product Options .
10) From the Other Installation Actions menu, select
View/Configure/Remove Installed Products.
11) Using the arrow keys, highlight the Emulex product and press the
key to remove the product from the installation database.
12) Exit the Install utility.
13) Remove the following directories and all associated files:
> sys:system\Emulex\system
> sys:system\Emulex
14) Remove all associated files in:
> sys:system\emx*.*
also remove the following files:
> sys:system\x.25_cca.nlm
sys:system\fr_cca.nlm
sys:system\subagent.nlm
15) Bring down and exit the server.
What’s Next?
After installing the DCP_link software, refer to Chapter 5 for:
† Software Configuration