Emulex DCP_link - Manual (Page 66)

4-6 Chapter 4
9) Highlight EMULEX WAN for NetWare and press to access
the Internetworking Configuration menu.
10) You are now ready to configure the Emulex DCP_link adapter and create
specific WAN links. Please turn to Chapter 5, Software Configuration
to continue.
Uninstall Procedures
If it becomes necessary to unload Emulex software from your server/router,
such as during an upgrade to a newer release, perform the following steps
according to the Novell NetWare version you are running (version 3.12 vs.
4.1).
Uninstall Using NetWare Version 3.12
1) At the console server prompt, type:
> LOAD INETCFG .
The Internetworking Configuration menu will be displayed:
2) Select Network Interfaces. Using the key, deconfigure all
interfaces associated with the Emulex adapter.
Figure 4-8. The Internetworking Configuration Menu
3) Press to return to previous menu.
4) Select Boards and remove all Emulex WAN configurations by
highlighting all references to the EMXMLID driver and pressing the
key.