Casio BE-300 - Manual (Page 61)

61
Testing a Dial-up Connection Setup
Perform the following steps to test a connection setup you created using the procedure under “To
configure a dial-up connection setup”.
1. Turn off your CASSIOPEIA and connect it to the device you plan to use to dial-up your
service provider.
• You can connect to a mobile phone or install a modem card. See the separate Hardware
Manual for details about using a cell phone or modem card.
2. Turn on your CASSIOPEIA.
3. On the Top Menu, double-tap Connections.
• This starts up Connections.
4. On the Connections screen, tap the connection setup you want to use so it is highlighted.
5. Tap Connect.
• This displays the dialog box shown below.
6. Tap Connect.
• This displays the dialog box shown below as your access point is dialed.