Casio BE-300 - Manual (Page 144)

144
NOTE
You can also use the following button operations at any time to adjust screen brightness without
displaying the brightness setting screen.
Auto-Dim Tab
You can use this tab to set up the CASSIOPEIA so its screen dims automatically whenever it is
left idle for a specific amount of time. This helps to extend battery life.
Align Screen
Use this setup screen to align the touch screen whenever you feel the figures on the screen are not
aligned properly with the area you tap with the stylus.
NOTE
• You can also start a screen alignment operation at any time without going through the setup
menu by holding down the power button as you press the OK button.
Perform this button operation:
Hold down Power button and press the right cursor
button.
Hold down Power button and press the left cursor
button.
To do this:
Make the screen brighter
Make the screen dimmer
Select this option to
enable auto dim when
you are running under
battery power.
Select this option to
enable auto dim when
you are running under
AC adaptor power.
Use these boxes to
specify the idle time
before auto dim is
triggered.
Tap here to start the
touch screen alignment
procedure.