Casio BE-300 - Manual (Page 140)

140
Chapter 7 Setting Up Your CASSIOPEIA
7-1 Setup Basics
This section describes various hardware, system, and other settings you can make to setup the
CASSIOPEIA to meet your specific needs.
On the Top Menu, double-tap Settings to display the setup menu shown below.
Setup Menu
Select the menu item for the type of settings you want to change.
To do this:
• Input information about yourself.
• Specify whether owner information should appear when you turn
on the CASSIOPEIA.
• Register a 4-digit numeric password.
• Configure the CASSIOPEIA so it requires input of a password
when it is turned on. Data cannot be accessed unless the
password is input.
• Specify CASSIOPEIA screen colors.
• Adjust screen contrast and brightness.
• Specify the idle time before the screen automatically dims.
• Adjust the touch screen alignment.
• Perform this procedure whenever you feel the figures on the screen
are not aligned properly with the area you tap with the stylus.
• Turn touch screen tap sounds on and off.
• Adjust the headphone volume.
• View the current battery pack .
• Specify the idle time before auto power off is triggered.
• View remaining program memory and storage memory capacity.
• View remaining storage card capacity (when you have a storage
card loaded in the CASSIOPEIA).
• Shutdown programs that are running.
Select this menu item:
Owner Information
Password
Color Scheme
Brightness
Align Screen
Volume & Sounds
Power
Memory