Casio BE-300 - Manual (Page 132)

132
• This starts up Backup and causes the dialog shown below to appear.
5. Tap Backup now.
• This causes the dialog shown below to appear.
• If you do not wish to assign a password, go to step 6 without inputting anything.
6. Tap Yes to start the backup or No to close the dialog without backing up anything.
• The “Backup in Progress” dialog appears while the backup operation is being performed.
• The message “Backup completed:” appears on the display after the backup operation is
complete.
7. After backup is complete, tap OK to quit Backup.
NOTE
If the backup operation is interrupted or unsuccessful for any reason and there is a previous
backup file on the storage card you are using, the previous file remains intact on the card.
To interrupt a backup operation
1. Tap the Cancel button on the message box that is on the screen while a backup operation is in
progress.
• This causes the message “Do you really want to cancel? ” to appear.
2. Tap Yes to cancel the backup operation or No to resume it.
If you want to assign a password to
the backup file, input up to 10
characters for the password here.
For added security, each letter you
input is shown as an asterisk in this
box.
Input the same password here
for confirmation.
If the storage card already
contains backup data, the
date of the last backup
appears here.
This area shows the amount
of free space on the storage
card and the amount of
CASSIOPEIA data memory
that is used.