Casio BE-300 - Manual (Page 107)

107
NOTE
• In the Stop Action Mode, recording continues and the image on the display remains unchanged
until all the images are recorded.
• After image recording is complete, a dialog appears telling you that the images are being stored
in memory.
• You can specify how many images are recorded per second. See “Configuring Record Settings”
on page 108 for details.
Using Timer Recording
You can set a timer for snapshot and stop action recording so the record operation starts after 10
seconds have passed. To use the timer, tap the
button on the control panel. This enables the
timer, which is indicated by the timer button changing to .
• The timer time counts down on the display.
• You can interrupt the timer countdown by tapping the
button or by changing to another
screen.
• To cancel timer operation, tap the
button so it changes to .
Interpreting Status Bar Information
The status bar shows the status of Photo Viewer, and the number of snapshots you can store under
current settings.
File Names
File names are assigned to image files using the following formats.
Snapshots
Example:
PIC 06 23 0001 .jpg
Indicates snapshot Month Day Number Extension
Stop Action Images
Example: CON 06 23 0001 .jpg - CON
06 23 0008 .jpg
Indicates stop action image Month Day Number Extension
Shows the number of snapshots you can
store under current settings. “Ready to record”
Press the SHUTTER button to record.
“Setup failed”
Recording cannot be performed because the Digital
Camera Card is not installed in the CASSIOPEIA
correctly, etc.