Casio BE-300 - Manual (Page 60)

60
Configuring Advanced Dial-Up Settings
The following procedure describes how to configure advanced settings that appear when you tap
the Advanced settings button on the Access Point Setup screen (page 57).
1. On the Access Point Setup screen, tap Advanced Settings.
2. After you finished, tap .
3. After all the settings are the way you want, tap OK to save them and return to the Access Point
Setup screen.
Use these settings to specify the number of tries and the
interval between tries when a connection fails because
your access point line is busy.
Use this setting to specify whether authorization protocol
is required when connecting. Normally you should leave
the Do not use option selected. Trying changing to the
Use option if you have trouble connecting.
Dial-up advanced setup 1 screen
Dial-up advanced setup 2 screen
Normally you should leave the Auto detect option
selected. If your provider uses a fixed IP address,
uncheck the Auto detect option and input the fixed IP
address.
Input the required information here as supplied by your
provider. Normally, you should specify DNS1 and DNS2
only when the Auto detect option is unchecked.