Set positions for the television to turn to, Video audio standby stand adjustment, For further information – Bang & Olufsen BeoVision 7-40/55 User Guide User Manual
Page 9

9
Set positions for the television to turn to
If your television is equipped
with the optional motorised
stand, you can tilt and turn it
using the remote control.
Furthermore, you can program
the television to tilt and turn
automatically to face your
favourite viewing position when
you switch on the television. It
can tilt and turn to a different
position when you listen to, for
example, a connected radio, and
tilt or turn away to a standby
position when you switch it off.
You can also turn your television
by hand.
NOTE! For information about first-
time installation of the motorised
stand, see Getting Started.
Choose one position for when you
switch the television on, one for audio
mode, and one for when you switch it off.
> Bring up the TV SETUP menu and highlight
STAND POSITIONS.
> Press the centre button to bring up the
STAND POSITIONS menu.
> Press the centre button to determine the
VIDEO position.
> Use , , and to tilt and turn the
television and place it according to your
viewing position.
> Press the centre button to store the
position.
To store a stand position for when an
audio source is switched on from the
television …
> Highlight AUDIO.
> Press the centre button to determine the
AUDIO position.
> Use , , and to tilt and turn the
television and place it as you wish.
> Press the centre button to store the
position.
To store a stand position for when the
television is switched off and in standby …
> Highlight STANDBY.
> Press the centre button to determine the
STANDBY position.
> Use , , and to tilt and turn the
television and place it as you wish.
> Press the centre button to store the
position.
> During first-time setup, press the green
button to continue first time-setup, or …
> … press and hold BACK to leave all
menus.
If you have a Beo4 remote control without
navigation button, or if the navigation
button on your remote control is disabled,
use the green button to tilt the television up
and the red button to tilt it down.
STAND POSITIONS
VIDEO
AUDIO
STANDBY
STAND ADJUSTMENT