Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 37)

37
You can select if the television should
activate 3D mode automatically,
manually or by prompt, when it detects
automatic 3D signalling the first time
after source or channel change. The
default setting is AUTO.
To activate 3D …
> Bring up the TV SETUP menu and
highlight 3D DISPLAY.
> Press the centre button to bring up the
3D DISPLAY menu and highlight 3D
SETTINGS.
> Press the centre button to bring up the
3D SETTINGS menu, and highlight
ACTIVATE 3D.
> Use the navigation button left or right to
select AUTO, PROMPT or MANUAL.
> Press the centre button to store, or …
> ... press and hold BACK to leave the menu
without storing.
When automatic 3D signalling is available,
the television switches to 3D mode
automatically if ACTIVATE 3D is set to AUTO.
If it is set to PROMPT, you must select
between VIEW IN 3D and VIEW IN 2D. If it is
set to MANUAL, you must enter the menu
and switch to 3D mode manually.
You can set up preferences for
watching 3D television, such as
selecting if the television should
automatically switch to 3D mode,
when automatic 3D signalling is
available.
If your TV is equipped with the
optional Blu-ray player, you can
also use it to play 3D Blu-ray discs.
Activate 3D and adjust settings
Set up 3D television
3D SETTINGS
ACTIVATE 3D PROMPT