beautypg.com

See two sources at the same time – Bang & Olufsen BeoVision 7-40/55 User Guide User Manual

Page 40

background image

A

B

A

B

40

See two sources at the same time

Your remote control gives you

access to a dual-screen function

for viewing two video sources at
the same time. You can also

bring up a video source and an
audio source at the same time.
For example, you can view a

video playback and a TV

programme at the same time,
provided that the selected sources
are available in your system.

While watching a programme or

recording, you can divide the
screen between the current
programme or recording and a
new programme or recording.

You can also swap the two

pictures at any time.

You cannot watch two recordings at the

same time.

If you watch 3D and switch on the dual-
screen function, the television will switch
to 2D.

If you have a Beo4, press LIST and use
the navigation button up or down until
P-V.AUX is shown in the Beo4 display,
to view a source registered in the

CONNECTIONS menu as V.AUX, such as

a set-top box.

Volume adjustment always affects picture A,

while other operations, such as selecting
channels, affect picture B. Choosing a new
source cancels dual-screen viewing.

You can view two HDMI (High Definition

Multimedia Interface) sources at the same
time, but only if one of the sources is

connected to either the HDMI A or HDMI B
socket, and the other source is connected to
either the HDMI C or HDMI D socket. For

further information about the HDMI sockets,
see the chapter about connection panels in
Getting Started.

While watching, for example, TV …
> Press P-and-P to bring up the P-and-P

display on Beo6. (Beo4: Press LIST and use

the navigation button up or down to bring
up P-AND-P).

> Press, for example, DVD to select the

source to view on the right side of the
screen (B).

> Press Swap to swap the left picture and

right picture. (Beo4: Press 0).

To leave the dual-screen function …

> Press BACK to leave the function and

return to normal viewing of the source on
the left side of the screen (A) or simply
select a source.

To bring up V.TUNER on the right hand side

of the screen, you must press P-and-P, then

TV. (Beo4: Press LIST and use the navigation

button up or down to bring up P-AND-P,

then press TV). To bring up hard disk

recordings on the right hand side of the
screen, you must press P-and-P, then

V.MEM. (Beo4: Press LIST and use the

navigation button up or down to bring up

P-AND-P, then press V.MEM).

This manual is related to the following products: