Hdmi matrix – Bang & Olufsen BeoVision 7-40/55 User Guide User Manual
Page 63
63
The HDMI MATRIX feature is an
additional feature which can be
purchased separately. When the
purchased feature activation key
is entered, additional software
becomes available in your
television. The HDMI Matrix itself
is a physical product that can be
connected allowing you to
connect several external sources
to your television and access
them via the Beo6 remote
control. For information about
additional features, contact your
Bang & Olufsen retailer.
HDMI MATRIX
The HDMI MATRIX must be connected
and set up by your Bang & Olufsen
retailer.
– Your Beo6 remote control must be
reconfigured before you can use the
HDMI Matrix.
– You cannot operate the HDMI Matrix with
a Beo4 remote control.
– You cannot connect more than one HDMI
Matrix in a setup.
– The HDMI Matrix cannot be configured on
an HDMI Expander.
– You cannot configure both the HDMI
Matrix and a source centre.
Settings in the HDMI MATRIX menu …
In the HDMI MATRIX menu, you can select
settings for your HDMI Matrix.
In the CONNECTIONS menu …
> Select the socket group to which you have
connected a HDMI Matrix.
> Select the HDMI MATRIX field and set it
to YES.
> The field INPUTS appears and you can
specify the number of sources you want
to connect. Set the field to a higher number
of sources than you have connected.
> Select an HDMI socket. You cannot select
NONE.
> Press the centre button to store the
settings and bring up the HDMI MATRIX
menu.
> Select the connected HDMI Matrix type.
> Press the centre button to store the
settings and bring up the CONTROL menu.
> Select an IR type to indicate how the TV
control is connected to the HDMI Matrix.
> Press the centre button to store the
settings.
When you have stored the settings for the
HDMI Matrix, an input list menu appears for
you to configure the sources connected to
the matrix,
If you at a later time disable a stored HDMI
Matrix configuration by setting the HDMI
MATRIX field to NO, your settings are still
saved. This means that if you set the field to
YES later, all your settings reappear.
When a HDMI Matrix is activated, it is
automatically registered as V.AUX2, also if
another source may already be registered as
V.AUX2. This source must then be registered
to another source name.
Important information
AV1
SOURCE
V.AUX2
HDMI MATRIX
YES
INPUTS
8
AUTO SELECTION
NO
TIMER RECORDER
NO
HDMI
A
SOUND INPUT
HDMI