Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 48)

48
Activate parental control
To make full use of the parental control
system, begin by assigning an access
code. This restricts access to the
programmes and channels with broad-
casted restrictions, and prevents the
settings from being changed by others.
Choose a code that is easy to remember.
The default setting is 0000.
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight PARENTAL
CONTROL.
> Press the centre button to bring up the
PARENTAL CONTROL menu and highlight
ACCESS CODE.
> Press the centre button to bring up the
ACCESS CODE menu.
> Press and use the number buttons to
enter the default code (0000). (Beo4: Use
the number buttons).
> Highlight NEW CODE and enter a new
code.
> Enter the new code once more to confirm it.
> Press the centre button to store the code.
> Press and hold BACK or press a source
button, for example TV or DTV to exit all
menus.
To change your code at any time, follow the
procedure described above. If, for some
reason, you have forgotten your code, then
you can key in 9999 three times when
OLD CODE is highlighted. This allows you to
enter a new code.
Assign an access code.
Assign an access code If parental control is available in
your area, you can switch it on or
off. You can apply TV parental
guidelines and the MPAA rating
system.
If you assign an access code and
switch parental control on, you
will be required to enter this
access code when ever you want
to watch a programme or
channel that has been blocked.
Whenever a blocked programme
or channel is selected, your screen
goes blank, the sound is shut off
and an on-screen menu prompts
you to enter your access code.
If you wish to change or override
your settings, the access code is
also required.
ACCESS CODE
OLD CODE . . . .
NEW CODE . . . .
CONFIRM CODE . . . .