Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 30)

A
(1)
B
(1)
A (2) B (2)
30
For Adaptive Sound Technology to
figure out the exact position of each
speaker, you will need to decide on two
fixed points, Point A and Point B, before
you can enter the settings of the speaker
setup menu. These points could,
for example, be on a wall.
Guidelines for fixing Point A and Point B:
1 Fix the points in the edge of a room, so all
speakers are placed on the same side of
an imaginary line between Point A and
Point B.
2 Fix the points far apart from each other,
at least two metres.
3 From both Point A and Point B you should
be able to see all speakers in the setup.
However, it is acceptable if a piece of
furniture is in the way. Examples of two possibilities for points A
and B with the imaginary line from one
point to the other. You can preset speaker
combinations for several listening positions
such as at the sofa when you watch
television, at the dining table or when you sit
in an armchair reading.
Points A and B
>> Adaptive Sound Technology