Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 72)

‘Zone XX’
(Option 6)
72
If you have BeoLink installed in
your home and you choose to
place your television in a link
room, you can operate all
connected systems through the
television.
You must follow the procedure
described below when you connect
your television for use in a link room:
1 Connect the link room television to
the mains
2 Using your remote control,
program the link room television
to the correct Option
3 Disconnect the link room television
from the mains
4 Make the necessary connections
5 Reconnect the link room television
to the mains.
Your television in a link room
For your entire system to function
properly, it is essential that the
television in the link room is set to the
correct Option before you connect it to
the television in the main room!
With Beo6 …
> Place yourself in front of the link room
television.
> While holding the • button, press the
centre button to bring up the SETUP
menu on Beo6.
> Let go of both buttons.
> Press Option Pgm to bring up the Option
Programming display on Beo6.
> Press the button that matches the zone in
which the television is placed.
With Beo4 …
> While holding the • button, press LIST on
Beo4.
> Let go of both buttons.
> Use the navigation button up or down to
bring up OPTION? in the Beo4 display
and press the centre button.
> Use the navigation button up or down to
bring up V.OPT in the Beo4 display and
press 6*.
*If you connect the television for use in a link
room where other link systems are already
connected, such as speakers, you must set
the television to Option 5 instead.
Option setting
Link room Main room