Connections – Bang & Olufsen BeoVision 7-40/55 User Guide User Manual
Page 11
Cable
network
POWER LINK 1
SUB
POWER
LINK
2–6
ATSC
ANALOGUE
ANALOGUE
HDMI IN
(A–D)
AV (1–6)
Digital cable/
HDTV box
ATSC
TV signal
Analogue
TV signal
AV 2
AV 1
Digital TV
[DTV2]
PVR Box
[V.MEM]
AV 5
MASTER LINK
VGA
BeoMaster
[PC]
AV 6
Camera
[CAMERA]
11
Connections
The connection panel on your
television allows you to connect
signal input cables as well as a
variety of extra equipment, such
as a video recorder or a linked
Bang & Olufsen music system.
Any equipment you connect to
these sockets must be registered
in the CONNECTIONS menu. For
further information,
Before you connect any equipment
to your television, remember to
disconnect the television from the
mains.
There are some restrictions as to the types of
equipment that can be connected to the
sockets.
Equipment with VGA output can only be
connected and registered to the AV5 and
AV6 sockets.
Loudspeakers
Use Bang & Olufsen Power Link speakers.
Use the cables enclosed with the speakers.
Cables are available from your Bang &
Olufsen retailer.
Equipment with HDMI™ output
Equipment with HDMI output such as a set-
top box can be connected to any available
HDMI socket in the TV, regardless of the
particular AV socket group to which you
have connected the equipment. To distribute
the source to another room you must also
connect a CVBS video signal from the
connected equipment to an AV socket on
the connection panel. For further
information on how to set up connected
equipment for use,