Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 73)

73
When you are in the link room, you can
operate all connected systems with the
remote control.
Use sources present only in one of the
rooms …
> Press the button for the source you wish
to use, for example RADIO.
> Operate the selected source as usual.
Use a main room source – source type
present in both rooms …
> Press Link to bring up a source display.
(Beo4: Press LIST and use the navigation
button up or down to bring up LINK in
the Beo4 display).
> Press the button for the source you wish
to use, for example TV.
> Operate the source as usual.
Use a link room source – source type
present in both rooms …
> Press the button for the source you wish
to use, for example TV.
> Operate the source as usual.
Listen to stereo sound in your link
room …
Usually sound distributed from a main room
video source, such as a set-top box, to the
link room is transmitted in mono. However,
you can select stereo sound:
> Press TV to switch on the television.
> Press AV to bring up a source display.
(Beo4: Press LIST and use the navigation
button up or down to bring up AV in the
Beo4 display).
> Press, for example DTV, to activate a
source connected to the main room
television, such as a set-top box.
While using this function, distribution of
other main room sources to other link room
systems is not possible.
Sound in the main room and the link room is
sometimes not synchronised. In some cases,
you can synchronise the sound by selecting a
source, then pressing AV and selecting the
source again. (Beo4: Select a source, then
press LIST and use the navigation button up
or down to bring up AV in the Beo4 display
and then select the source again).
If you switch to a different source in the
main room, the sound volume may change.
Link room operation
>> Your television in a link room
Link room Main room