Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 29)

29
Adaptive Sound Technology
Your system is equipped with
Adaptive Sound Technology
which allows you to enjoy an
optimal sound experience with
a multiple speaker setup even
though your speakers are not
placed correctly for your listening
position. The Adaptive Sound
Technology feature in the
television uses all connected
speakers to create the ultimate
sound experience of perfectly
placed speakers.
To enjoy the advantages of this
setup, several speakers and a
Beo6 remote control are
necessary. If you have only a few
speakers or a Beo4 remote
control, this setup is not
recommended and you should
choose the setup without
Adaptive Sound Technology
described in the chapters about
first-time setup and loudspeaker
setup
on pages 7 and 24 .
In this part of the setup you set
up speakers for your television
and an optional projector.
For information about daily use
of Adaptive Sound Technology,
see Getting Started.
If you choose to switch on the Adaptive
Sound Technology function, you can still
disable it in one or more of the listening
presets you make.
> Bring up the TV SETUP menu and
highlight OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight SOUND.
> Press the centre button to bring up the
SOUND SETUP menu and highlight AST
ON/OFF.
> Press the centre button to bring up the
AST ON/OFF menu.
> Use the navigation button left or right to
enable or disable the technology.
> Press the centre button to store or press
and hold BACK to leave the menu without
storing.
In the SOUND SYSTEM menu you can see
whether the Adaptive Sound Technology is
enabled or not and which listening preset is
currently activated.
See page 28 .
Enable Adaptive Sound Technology
AST ON/OFF
AST ON