Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 60)

60
If your television has been disconnected
from the mains for 15–30 minutes, the
television prompts you for the pincode
when you switch it on. You may not be
able to switch the television on
immediately – wait approximately
30 seconds and try again.
IMPORTANT! If you are prompted for a
pincode the first time you switch on
your television, contact your Bang &
Olufsen retailer.
Should you lose or forget your code, contact
your Bang & Olufsen retailer. Your retailer
can provide you with a mastercode, which
disables your pincode.
To enter your pincode …
> Enter the code digits.
> Press the centre button when the last
digit is entered.
> Your television starts up again.
Five incorrect entries will cause the television
to shut down for three hours, during which
operation is not possible.
If you have forgotten your pincode …
> Contact a Bang & Olufsen retailer to
receive a five-digit mastercode.
> When the television prompts you for your
pincode, press and hold to bring up the
MASTERCODE menu.
> Enter the code digits and press the centre
button to deactivate your pincode and
reactivate your television.
To use the pincode system again …
> Follow the procedure for activating the
pincode system.
Enter the pincode
>> The pincode system
PINCODE
PINCODE 0 . . .
MASTERCODE
MASTERCODE 0 . . . .