Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 22)

22
>> Edit scanned TV channels
You can fine-tune your TV channels if,
for example, you wish to adjust the
frequency.
> Bring up the TV SETUP menu and highlight
CHANNEL SETUP.
> Press the centre button to bring up the
CHANNEL SETUP menu and highlight FINE
TUNE.
> Press the centre button to bring up the
FINE TUNE menu. CHANNEL is highlighted.
> Use the navigation button left and right to
select a channel to fine-tune.
> Highlight FINE and use the navigation
button left or right to fine-tune the
channel.
> Highlight SOUND and use the navigation
button left or right to select a sound type
– STEREO, MONO or SAP – for the channel.
> Press the centre button to store the settings.
If you select CABLE BOX or OFF for TV
TUNER in the TUNER SETUP menu, the EDIT
CHANNELS and FINE TUNE menus are
inaccessible.
What’s on the FINE TUNE menu …
CHANNEL … Select a channel to fine-tune.
FINE … Fine tune the frequency of a channel.
You can fine tune within the range of
-8 – +8.
SOUND (mono, stereo or language) …
Several types of sound may be available
for different programmes, mono, stereo or
different languages. On the relevant
channel or frequency select the options
MONO, STEREO or SAP.
Even though you store a type of sound/
language, you can switch between the
various types while watching a TV
programme. For further information,
see Getting Started.
Fine-tune channels
FINE TUNE
CHANNEL 69
FINE +3
SOUND STEREO