Connect and operate an audio system – Bang & Olufsen BeoVision 7-40/55 User Guide User Manual
Page 67
67
If you connect a compatible
Bang & Olufsen audio system to
the television using a Master Link
cable, you obtain the benefits of
an integrated audio/video
system.
Play a CD on your audio system
using speakers connected to the
television, or switch on a TV
programme and send the sound
to your audio system speakers.
Your AV system can be placed
together in one room or in two
rooms with the television placed
in one room and the audio
system with a set of speakers
placed in another.
If you want to use Master Link to integrate
your audio/video system, you must set
POWER SAVING to OFF to make your setup
function correctly,
Not all Bang & Olufsen audio systems
support integration with the television.
Connect and operate an audio system
Using a BeoLink cable, connect the
sockets marked MASTER LINK on the
television and the audio system.
Program the AV setup with Beo6
If your television has been set up in an
AV system, you may need to set it to the
correct Option with Beo6. Switch the
entire system to standby first.
Option setting for the television …
> Place yourself in front of the television.
> While holding the • button, press the
centre button to bring up the SETUP
menu on Beo6.
> Let go of both buttons.
> Press Option Pgm to bring up the Option
Programming display on Beo6.
> Press the button that matches the zone in
which the television is placed, for example,
TV Area.
Option setting for the audio system …
> Place yourself in front of the audio system.
> While holding the • button, press the
centre button to bring up the SETUP
menu on Beo6.
> Let go of both buttons.
> Press Option Pgm to bring up the Option
Programming display on Beo6.
> Press the button that matches the zone in
which the audio system is placed, for
example, Audio Area.
If you move your link room products to other
rooms, remember to have your Beo6 remote
control reconfigured by your Bang & Olufsen
retailer.
Program the AV setup with Beo4
You can set your television, placed in an
AV-system, to the correct Option using
Beo4. Switch the entire system to
standby first.
Option setting for the television …
> While holding the • button on Beo4,
press LIST.
> Let go of both buttons.
> Use the navigation button up or down to
bring up OPTION? in the Beo4 display
and press the centre button.
> Use the navigation button up or down to
bring up V.OPT in the Beo4 display and
then enter the appropriate number
(1, 2, 4, 5 or 6).
Option setting for the audio system …
> While holding the • button on Beo4,
press LIST.
> Let go of both buttons.
> Use the navigation button up or down to
bring up OPTION? in the Beo4 display
and press the centre button.
> Use the navigation button up or down to
bring up A.OPT in the Beo4 display and
enter the appropriate number
(0, 1, 2, 4, 5 or 6).
Connect your audio system to the television