Set up your remote control, Set up your remote control, 61, Tell the television if the navigation button on – Bang & Olufsen BeoVision 7-40/55 User Guide User Manual
Page 61: Your remote control is enabled or disabled, Remote control, For information about setting, Up your remote control
61
You must set up your television
to be operated with a remote
control with or without a
navigation button.
Even though your remote control
has a navigation button, you can
choose to set your television up
for operation without navigation
button. This can be useful if you
have a BeoLink system also
comprising a television without
the REMOTE CONTROL menu.
If you set up your television for
operation without a navigation
button and your Beo4 has a
navigation button, you must also
change the MODE setting of
your Beo4. See the Beo4 Guide
or contact your retailer for
further information.
Set up your remote control
In the REMOTE CONTROL menu you set
up whether the Beo4 remote control you
are using has a navigation button or not.
To make remote control settings …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu, and highlight REMOTE
CONTROL.
> Press the centre button to bring up the
REMOTE CONTROL menu.
> Use the navigation button up and down to
highlight the setting you want.
> Press the centre button to store the
setting.
> Press BACK to back up through previous
menus or press and hold BACK to exit all
menus.
For information about menu operation with
the different types of remote controls,
.
Remote control settings
REMOTE CONTROL
NAVIGATION BUTTON
NO NAVIGATION BUTTON