Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 20)

20
Edit scanned TV channels
You can ‘remove’ channels you
do not use from the channel list.
Channels you ‘remove’ are
skipped over when you step
through channels using the
arrow buttons on the remote
control. You can still select them
in the channel list by pressing the
channel number.
In addition, you can give
channels names of your own
choice, re-scan to find new
channels or fine-tune existing
channels.
At any time, you can remove channels
you do not use. If you wish, you can
restore channels that you have removed.
> Bring up the TV SETUP menu and highlight
CHANNEL SETUP.
> Press the centre button to bring up the
CHANNEL SETUP menu. EDIT CHANNELS
is already highlighted.
> Press the centre button to bring up the
EDIT CHANNELS menu.
> Use the navigation button up and down to
select the channel you wish to remove.
> Press the yellow button once to remove
the channel.
> Press the yellow button to add the
channel again.
> When you have removed the relevant
channels, press and hold BACK to exit all
menus.
If you select CABLE BOX or OFF for TV
TUNER in the TUNER SETUP menu, the EDIT
CHANNELS and FINE TUNE menus are
inaccessible.
Remove TV channels
EDIT TV CHANNELS
CNN 1
DISCOVERY 2
CWNBC 4
BBCWORLD 5
SUPER CH 6
. .
. .
CINEMA 17
RTL 18
. . . . . 3