Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 13)

STB
STB
PLUG
IR
13
In the AV menus you can select how a
PUC controlled product is connected.
You can choose between PLUG (cable)
and IR (IR Blaster). If you select PLUG,
you must choose between
MODULATION ON and MODULATION
OFF. For information about type of cable
and modulation settings, contact your
retailer.
IR-transmitters: To operate non-Bang &
Olufsen products with a Bang & Olufsen
remote control, attach a Bang & Olufsen IR-
transmitter to each of the products. Connect
each transmitter to the corresponding socket
marked PUC on the main connection panel.
>> Connections
Control