Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 10)

10
To disable the internal tuner …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu, and highlight TUNER SETUP.
> Press the centre button to bring up the
TUNER SETUP menu and highlight TV
TUNER.
> Use the navigation button left or right
to switch between the setting OFF,
ANTENNA, CABLE or CABLE BOX.
> Highlight ATSC.
> Use the navigation button left or right to
switch between the setting ON or OFF.
> Press the centre button to store the
settings, or …
> … press and hold BACK to leave the
menus without storing.
If you select CABLE BOX, follow the on-
screen information to specify which cable
box you have connected to the television.
If you select ANTENNA or CABLE, a scanning
process begins when you store the setting.
Tuner setup
If you disable the TV tuner or
ATSC tuner, you can activate a
connected peripheral unit with
the TV or DTV button.
In this menu you can also scan in
channels or identify a cable box
you may have connected to the
television.
TUNER SETUP
TV TUNER CABLE
ATSC ON
You can register the source of your TV video
signals in the TV TUNER field at any time,
it is not required during the first-time setup
procedure.
For further information about the TUNER
SETUP menu and about scanning TV
channels, see page 18 .