Bang & Olufsen BeoVision 7-40/55 User Guide - Manual (Page 38)

38
If you prefer to watch a television
programme or other Side-by-Side 3D or
Top/Bottom 3D material in 2D format,
you can activate the 3D DISPLAY to view
the material in full screen 2D. You can
also choose to watch the material in 3D*
1
To activate 2D for 3D formats …
> Bring up the TV SETUP menu and highlight
3D DISPLAY.
> Press the centre button to bring up the
3D DISPLAY menu and highlight 2D.
> Press the centre button to bring up the
2D menu.
> Use the navigation button up or down to
select between SIDE BY SIDE 2D or TOP/
BOTTOM 2D.
> Press the centre button to store, or …
> ... press and hold BACK to leave the menu
without storing.
> To deactivate 3D formats, change source
or select standard 2D.
The 2D menu only works with Side-by-Side
and Top/Bottom formats, not with Frame
Packed 3D.
1 * If you do not choose either 2D or 3D
format, your television will continue showing
a distorted picture.
>> Set up 3D television