KACO blueplanet 750 - 1000 kVA - Manual (Page 43)

KACO blueplanet 1000/875/750 TL3 M1 IS OD DEX0 Page 43
Storage/Installation/Start-up
“SD card in slot” icon
The inverter checks the card. If the SD card was detected, the “SD card in slot” icon appears in
the lower right-hand corner of the display.
" Press the SD card icon.
" Wait until the SAFE icon is displayed.
SAFE
Remove the SD card
“Data was saved to the SD card” icon
You can remove the SD card. The icon is displayed for one minute.
" Open the inverter.
" Remove the SD card by gently pressing and then releasing it. The SD card will pop out
slightly. You can now remove it.
" Close the inverter and start it up.
NOTE
Do not remove the SD card until the SAFE icon is displayed so that it will be detected by the
HMI when reinsert it.
5.10.2 Status display for speaker
Audible signal when you press the LCD screen
No signal
5.10.3 Using the main menu
Press button Result / Function
PV Array The measured values for the PV generator are displayed
Inverter The measured values for the inverter are displayed
Power grid (AC connection) The measured values for the power grid are displayed
ON Switches on the inverter
OFF Switches off the inverter
Speaker Switches speaker on/off
Table 3: button function