KACO blueplanet 750 - 1000 kVA - Manual (Page 34)

Page 34 KACO blueplanet 1000/875/750 TL3 M1 IS OD DEX0
Storage/Installation/Start-up
1, 2, 3
2
2
1
2
Figure 23: BP1000/875/750 TL3 OD DE (interior view)
Key
1 Fuse F1, 2, 30, 31, 38, 39
Circuit breakers CB32, 34, 35, 40
2 Circuit breakers MCB21
Disconnect switch
DS10-1, DS10-2, DS10-3
Circuit breakers CB20
3 Circuit breaker CB37
When voltage is present at the inverter, it can be started up. Use the HMI interface to start up the inverter.
The inverter begins operation in a specified sequence. For more information, see section 5.2 (“Transporting
the unit to the installation location”)
If a fault occurs, the inverter cannot begin operation. For more information on faults, see section 6 (“Faults
and Warnings”).
NOTE
If the fault cannot be reset using “Fault reset”, please contact our service department.