KACO blueplanet 750 - 1000 kVA - Manual (Page 42)

Page 42 KACO blueplanet 1000/875/750 TL3 M1 IS OD DEX0
Storage/Installation/Start-up
5.10 HMI main menu
ON OFF
Circuit breaker
CB10 Speaker
SD card Circuit breakers
MC21 + CB20
Fault History Statistics Setup
701.0V 380.0V
75.8kW 79.0kW
45.0°C
Date/Time
Displayed button colors
Colour Meaning
Green Normal operation
Red
Fault (not for switches DS10,
MC21, CB20)
Grey Not in use
Figure 30: Display when the HMI starts up
5.10.1 Changing the SD card, status display
DANGER
Lethal voltages are still present in the terminals and lines of the inverter even after
the inverter has been switched off and disconnected!
Coming into contact with the lines and terminals in the inverter will cause serious
injury or death.
Only authorized electricians who are approved by the supply grid operator may open.
Install and maintain the inverter.
› Do not touch the lines and terminals when view the HMI screen.
If you want to view the HMI screen, you have to turn inverter off using the Key Switch and open the AC part
door. After HMI screen check, Please close the inverter and start it up using the Key Switch.
Insert the SD card
“No SD in slot” icon
" Open the inverter. The inverter shuts down.
" Slide the SD card into the slot until it locks into place.
" Close the inverter and start it up.
" Press the ON button. The inverter starts up.