Yaskawa SmartTrac Fault Tables - Manual (Page 40)

10/17/00
New Berlin
Technology Center
Smart Trac
Product Development
Design Document
Faults.doc
Rev. # 19 Page 39 of 64
Title: Fault Declarations
The information contained in this document is the CONFIDENTIAL property of MagneTek Inc.
File = N:\PROJECT\515\SmartTrac\DOCS\Faults.DOC Print Date: 10/17/00
39
Displayed Fault
No.
Priority D
is
p
lay?
Newest
List
?
Ol
d
es
t
List
?
Severity
Assig
n
Program
Input
Corrective Action
Control
Node
Monitor
Fault
Manager
In
ternal Fault
No
.
Fault Legend Description
17533 95539 30003 MC Answerback UV3 – Main contactor fault. Main
circuit magnetic contactor (soft
charge contactor) does not operate
correctly. Yes Yes Yes Minor Major Check contactor wiring. Inspect
contactor for damage and defects.
Note: fault is declared only if drive is
in Run mode.
17534 95540 30004 Short Circuit SC – Short circuit on Smart Trac
AC1 inverter PCB output terminals
(motor wiring). Yes Yes Yes Minor Major Check for correct motor
wiring/capacity. Note: fault is
declared only if drive is in Run
mode.
17535 95541 30005 Ground Fault GF – Ground fault. Drive output
ground current exceeded 50% of
drive rated current. Yes Yes Yes Minor Major Check for correct motor
wiring/capacity. Look for shorts
between motor leads and ground.
Inverter power transistor(s) may be
damaged. Note: fault is declared only
if drive is in Run mode.
17536 95542 30006 Overcurrent OC – Overcurrent. Output current
exceeded 200% of drive rated
current. Yes Yes Yes Minor Major Acceleration time may be set too
low. Motor load may be too great for
drive to handle. Motor may be
jammed or defective. Note: fault is
declared only if drive is in Run
mode.