Yaskawa SmartTrac Fault Tables - Manual (Page 17)

10/17/00
New Berlin
Technology Center
Smart Trac
Product Development
Design Document
Faults.doc
Rev. # 19 Page 16 of 64
Title: Fault Declarations
The information contained in this document is the CONFIDENTIAL property of MagneTek Inc.
File = N:\PROJECT\515\SmartTrac\DOCS\Faults.DOC Print Date: 10/17/00
16
Displayed Fault No.
Priority D
is
p
lay?
Newest
List
?
Ol
d
es
t
List
?
Severity
Assig
n
Program
Input
Corrective Action
Control
Node
Monitor
Fault
Manager
Fault Legend Description
27 39 Bad Bit
Number Requested bit number is
unavailable. No Yes Yes Minor Minor Verify that there are no hardware problems on
the PC used to create the application. Re-
compile and reload the program and reload it to
the SmartTrac drive. The Smart Trac main CPU
card may be faulty. If available, download a
small test program to see if fault persists.
28 40 Bad Data Size Mismatch found when
performing computation on 2
differing data types. No Yes Yes Minor Minor Check application program for data type
mismatches.
29 41 Bit Out of
Range Logical bit does not fit within
bounds of data type. For
example, an attempted was made
to OR bit 0x0800 with a byte. No Yes Yes Minor Minor Verify that there are no hardware problems on
the PC used to create the application. Re-
compile and reload the program and reload it to
the SmartTrac drive. The Smart Trac main CPU
card may be faulty. If available, download a
small test program to see if fault persists.
2A 42 Bad Function
Ptr Pointer to a Function Block call
is invalid. ‘C’ FB cannot be
processed. No Yes Yes Minor Minor Verify that there are no hardware problems on
the PC used to create the application. Re-
compile and reload the program and reload it to
the SmartTrac drive. The Smart Trac main CPU
card may be faulty. If available, download a
small test program to see if fault persists.
2B 43 Bad Lower
Bound Index into an internal array has
exceeded the lower bounds. No Yes Yes Minor Minor Verify that there are no hardware problems on
the PC used to create the application. Re-
compile and reload the program and reload it to
the SmartTrac drive. The Smart Trac main CPU
card may be faulty. If available, download a
small test program to see if fault persists.