Yaskawa i80M Maintenance Manual User Manual

Page 155

(c)

Set

SW1 on the module as it was before

replacement.

(d) Insert the module in line with the guide of the NC

rack and tighten mounting screw.

(e) Insert the CN1O and

cables into the original

positions.

(3)

Checking Functions After Replacement

(a)

Check that

12V, and

outputs are not

shorted due to overloading.

(b) Check that the initial is screen is displayed by

initially applying power to the NC.

(c)

that keys on the control panel can be

operated.

With model JANCD-FC903, check that switches on the

machine control panel can be operated.

147