Yaskawa i80M Maintenance Manual - Manual (Page 153)

(3) Checking Functions After Replacement
(a) Check that 12V, and outputs are not
shorted due to overloading.
(b) Check that input is in the range from 170
to
(c) Check that 200VAC is supplied with SOURCE lamp
on.
(d) Check that upon the first application of power to
the NC, each output is output normally and the
alarm indication lamp (red) is off.
Normal value: 4.75 to 5.25V
11.87 to
-12V -11.87 to
20.4 to 27.6V
(e) Check that the NC operates normally upon
application of the second power to the NC.
145