SMA SUNNY WEBBOX - Manual (Page 67)

SMA Solar Technology AG 10 Device Settings
User Manual SPortal-WB-CLCON-BA-en-25 67
10.2.6 Deleting a Device
1. Select "Configuration > Device Overview".
2. In the device line, select the icon for device characteristics.
☑ The device characteristics window opens.
3. Select [Edit].
4. Select [Delete].
☑ A security prompt opens.
5. To delete the device permanently, select [Delete].
10.2.7 Adding/Replacing Devices (Configuration Wizard)
You can add new devices to Sunny Portal or replace devices as soon as the communication device
starts transmitting data from the new devices to Sunny Portal. Sunny Portal recognizes the new devices
and opens the configuration wizard automatically when you log into Sunny Portal with your access
data. From a total of 10 or more devices, you can add several devices simultaneously by clicking the
button underneath the list. After you have replaced a device using the configuration wizard, the
replaced device is automatically deleted in Sunny Portal.
1. To open the configuration wizard manually, select either "Name of Your Plant >
Plant Monitoring" or "Configuration > Device Overview > Overview of New Devices".
☑ The configuration wizard opens.
2. Select [Set up device now].
3. To add a device, select
in the device line and follow the instructions of the configuration
wizard.
4. To replace a device, select in the device line and follow the instructions of the configuration
wizard.
5. To add or replace another device, repeat the above steps.
If you delete a device, all the data of that device is deleted permanently. Check
in advance whether it is sufficient to deactivate the device (see Section 10.2.1
”Activating/Deactivating the Device” (page 63)).
Replacing a device using the configuration wizard
After you have replaced a device using the configuration wizard (see Section 10.2.7
”Adding/Replacing Devices (Configuration Wizard)” (page 67)), the replaced device is
automatically deleted.