2 changing the device name, 3 changing the device description, 4 setting the phase – SMA SUNNY WEBBOX User Manual
Page 64: Changing the device name, Changing the device description, Setting the phase
10 Device Settings
SMA Solar Technology AG
64
SPortal-WB-CLCON-BA-en-25
User Manual
10.2.2 Changing the Device Name
The serial number of the device is displayed as the default device name.
1. Select "Configuration > Device Overview".
2. In the device line, select the icon for device characteristics.
☑ The device characteristics window opens.
3. Select [Edit].
4. Enter new name in the "Name" field.
5. Select [Save].
10.2.3 Changing the Device Description
1. Select "Configuration > Device Overview".
2. In the device line, select the icon for device characteristics.
☑ The device characteristics window opens.
3. Select [Edit].
4. Enter your remarks on the device in the "Description" field.
5. Select [Save].
10.2.4 Setting the Phase
You can set the phase into which the inverter feeds.
1. Select "Configuration > Device Overview".
2. In the device line, select the icon for device characteristics.
☑ The device characteristics window opens.
3. Select [Edit].
4. Activate the respective field L1, L2, or L3 in the "Phase" area.
5. Select [Save].