SMA SUNNY WEBBOX - Manual (Page 49)

SMA Solar Technology AG 8 Plant Properties
User Manual SPortal-WB-CLCON-BA-en-25 49
8 Plant Properties
8.1 Plant Data
On the "Configuration > Plant Properties" page, you can view or edit general information on your
PV plant. Some of the information is displayed on the "Plant profile" page.
You can perform the following settings, as explained in the sections below:
• Change general plant data
• Change the plant name
• Delete the Plant
• Set the plant power
• Change the plant description
• Create a plant image
8.1.1 Changing General Plant Data
1. Select "Configuration > Plant Properties".
2. Select the "Plant data" tab.
3. Select [Edit].
4. Change the plant data. The following settings are possible:
5. Select [Save].
Name Name of the active plant. The plant identifier is used as
the default plant name. (Changing plant name, see Section
8.1.2 ”Changing the Plant Name” (page 50)).
Plant identifier Plant identifier for the plant currently selected. The plant
identifier is defined when you register the plant.
Commissioning Date on which the plant was created in Sunny Portal.
Street/no. Street address to which the plant is assigned.
Postal code/city Postal code and city to which the plant is assigned.
Country Country in which the plant is located.
Federal state Federal state in which the plant is located.
Time zone Here, you can select the time zone.
Longitude Longitude and latitude of the plant location. In order to have
the geodata for the location automatically entered from the
database, select "Find geodata".
Latitude
Height Altitude of plant location