SMA SUNNY WEBBOX - Manual (Page 50)

8 Plant Properties SMA Solar Technology AG
50 SPortal-WB-CLCON-BA-en-25 User Manual
8.1.2 Changing the Plant Name
The plant identifier is used as the default plant name. You can change the plant name and assign your
plant a name. If you have several plants registered at Sunny Portal, you will be able to distinguish
better between plants by assigning them meaningful names.
1. Select "Configuration > Plant Properties".
2. Select the "Plant data" tab.
3. Select [Edit].
4. In the "Name" field, enter the desired name for the plant (e.g., "Smith House" or "WebBox Plant
South").
5. Select [Save].
8.1.3 Deleting the Plant
1. Select "Configuration > Plant Properties".
1. Select the "Plant data" tab.
2. Select [Edit].
3. Select [Irretrievably delete plant].
4. To delete plant permanently, Select [Yes].
8.1.4 Setting the Plant Power
The plant power is the sum of the power of all PV modules.
Options for Configuring Plant Power:
• Enter the plant power manually
• Calculate plant power from the total power of all the inverters
Entering the Plant Power Manually
1. Select "Configuration > Plant Properties".
2. Select the "Plant data" tab.
3. Select [Edit].
4. In the "Power" area, "Plant power" field, enter the plant power.
5. In order to configure the PV module manufacturer, make a selection in the "Manufacturer" field.
6. In order to configure the module type, make a selection in the "Module type" field. The possible
settings depend on the selected manufacturer.
7. Select [Save].
You cannot undo the delete process.
If you delete a plant, all devices and data related to this plant are permanently deleted.