SMA SUNNY WEBBOX - Manual (Page 48)

7 System Monitoring SMA Solar Technology AG
48 SPortal-WB-CLCON-BA-en-25 User Manual
7.4.2 Configuring an Event Report
You can set up three event reports each containing different events and to be sent at different times.
You can select four events from Sunny Portal and the plant: information, warnings, disturbances,
errors.
1. Select "Configuration / Report Configuration".
2. Select an event report in the "Report Configuration" field.
3. Select [Edit].
4. Configure report. The following settings are possible:
5. In order to send a test report to set e-mail addresses, select [Send test report].
6. Select [Save].
7.4.3 Manually Regenerating Reports
You can regenerate the report of a certain date at a later time. Thereafter, you can send the report to
the e-mail addresses configured in the report.
1. Select "Configuration / Report Configuration".
2. Select the desired report in the "Report Configuration" field.
3. In the "Report date" field in the "Regenerate report manually" area, select the date of the report
to be regenerated.
4. Select [Generate].
☑ Next to the button a message is displayed that the report has been sent.
Activate report If the report is activated, it will be sent to the set recipients at the set
interval. You can also save report settings and activate the report
later.
Recipient In the "E-mail address(es):" field, enter the recipient's e-mail address.
If you enter several e-mail addresses, please separate these by
commas.
Interval In order to receive the report hourly, activate the "Hourly" field. In
order to receive the report daily, activate the "Daily" field and select
the time.
Content
In the "Portal" and "Plant" lines, activate the respective fields of the
events to be included in the report.
Send report as: Text: You receive the e-mail with the data in text format.
HTML: You receive the e-mail with the data in HTML format.
PDF: You receive the e-mail in text format, with the data as a PDF
attachment.
Maximum number of
messages in one
report Select the maximum number of messages permitted in one report.
If you require empty reports to be sent as well, activate
"Send empty reports if no new events are available".