SMA SUNNY WEBBOX - Manual (Page 27)

SMA Solar Technology AG 6 Page Design
User Manual SPortal-WB-CLCON-BA-en-25 27
6.3.3 Adding a Plant Profile
1. In order to add a heading, enter the heading in the "Title" field.
2. If there are several plants in the "Plant" field, select the desired plant.
3. Activate the fields for which you wish data to be displayed.
4. Select [Save].
5. Select [Save].
☑ The plant profile has been added and is now displayed.
6.3.4 Creating an XY Diagram
Procedure:
• Configure Y axis, X axis
• Configure time settings
• Make extended configurations
Configuring Y axis, X axis
1. Select a plant or a device in the "Plant/devices" field in the "Y axis", "X axis" area. Only devices
of the active plant can be selected. TIP: In order to narrow your selection, use the "Filter
selection" field to choose a device type or "Plants".
2. Select a channel in the "Channel" field.
3. Select [+].
☑ The table with the selected device or plant is displayed.
4. In order to add further plants or devices, repeat the previous steps.
5. Select the desired unit in the "Unit" field.
Selectable channels
For devices, all channels which are transmitted to Sunny Portal are available. For a plant,
the calculated channels are available (CO
2
avoided, energy, power, compensation,
performance ratio, specific plant yield). The unit of the first channel selected determines the
additional channels available for selection.
The selection of further channels is based on the unit of the first channel
If the base unit of the first selected channel is "Watts", the only channels subsequently
selectable are those compatible with "Watts". The selection options are automatically
restricted by Sunny Portal accordingly.