HEIDENHAIN PWM 8 - Manual (Page 82)

- 82 -
18.10.2 Adapter cable with 14-pin PBC connector
e.g. ERN 1387 with incremental track Zn and analog commutating track Z1
Adapter cable Id.No. 330980-xx / Zn/Z1
Signal Color
Coupling
17-pin, male
PCB connector
14-pin
PIN 1 Up sensor blue 7a
PIN 2 R- black 4a
PIN 3 R+ Red 4b
PIN 4 0V sensor White 3a
PIN 5 Temp.+ Green -
PIN 6 Temp.- Brown -
PIN 7 Up Brown/green 1b
PIN 8 D- Violet 6a
PIN 9 D+ Yellow 2b
PIN 10 0V White/green 5b
PIN 11 Internal shield - -
PIN 12 B+ Blue/black 3b
PIN 13 B- Red/black 5a
PIN 14 C+ Gray 7b
PIN 15 A+ Green/black 6b
PIN 16 A- Yellow/black 2a
PIN 17 C- Pink 1a
Caution:
This cable is not intended for feed-through operation at the machine, since there are no lines for temperature
monitoring! Observe the shield!