HEIDENHAIN PWM 8 - Manual (Page 67)

- 67 -
16 Items supplied
16.1 Hardware
Interface board ~1 Vpp with Zn/Z1, EnDat, SSI Id.No. 312186-xx
16.2 Adapter Cables overview
Id.No. see section
Adapter kit 1
Adapter Zn/Z1 IN
Adapter Zn/Z1 OUT
349312-01
349312-02 18.9.1
18.9.1
Adapter kit 2
Adapter EnDat/SSI IN
Adapter EnDat/SSI OUT
349312-03
349312-04 18.9.2
18.9.2
Adapter cables
Adapter cable with 12-pin PCB connector
for 1Vpp encoders with EnDat or SSI (Pos.Enc.EnDat)
Adapter cable with 14-pin PCB connector
for 1Vpp encoders with Zn/Z1 track (Pos.Enc.EnDat)
349839-xx
330980-xx
18.10.1
18.10.2
Adapter cable, 17/17-pin, PWM to motor (Pos.Enc.EnDat) 323897-xx 18.11
Adapter cable to IK115 interface board 324544-xx 18.12
5V voltage controller for cable lengths > 6m (Pos.Enc.EnDat);
HEIDENHAIN 370225-01 16.4
5V voltage controller for cable lengths > 6m (Mot.Enc.EnDat);
SIEMENS 370224-01 16.5
Adapter cable, 17/17-pin, PWM to motor (Mot.Enc.EnDat) 340302-xx 18.13
Adapter cable, 17/15-pin, PWM to subsequent electronics
(Mot.Enc.EnDat) 332115-xx 18.14
Adapter cable, 17/25-pin, PWM to subsequent electronics
(Mot.Enc.1Vss) 289440-xx 18.15
Adapter cable, 17/25-pin, PWM to subsequent electronics
(Mot.Enc.EnDat) 336376-xx 18.16
Adapter cable, 17/17-pin, PWM to motor (Pos.Enc.EnDat) 336847-xx 18.17
Note:
For connection via the flange socket of the motor encoder always use the adapter kit (1 or 2)!
(SIEMENS pin layout adapted to HEIDENHAIN pin layout)