HEIDENHAIN PWM 8 - Manual (Page 80)

- 80 -
18.9.2 Adapter kit 2 (EnDat/SSI) for operation with Siemens drives with HEIDENHAIN
EnDat/SSI encoders and non-HEIDENHAIN wiring
Kit 2: Adapter EnDat/SSI IN: Id.No. 349312-03 for flange socket IN of interface board
PWM8 side (Pos.Enc.EnDat) Signal Color Drive side (Mot.Enc.EnDat)
Flange socket 17-pin, male Flange socket 17-pin,
knurled coupling ring
PIN 1 Up sensor Blue PIN 16
PIN 2 n.c.
PIN 3 n.c.
PIN 4 0V sensor White PIN 15
PIN 5 Temp.+ Green PIN 8
PIN 6 Temp.- Brown PIN 9
PIN 7 Up Brown/green PIN 10
PIN 8 CLOCK+ Violet PIN 5
PIN 9 CLOCK- Yellow PIN 14
PIN 10 0V White/green PIN 7
PIN 11 Internal shield - PIN 17
PIN 12 B+ Blue/black PIN 11
PIN 13 B- Red/black PIN 12
PIN 14 DATA+ Gray PIN 3
PIN 15 A+ Green/black PIN 1
PIN 16 A- Yellow/black PIN 2
PIN 17 DATA- Pink PIN 13
Kit 2: Adapter EnDat/SSI OUT: Id.No. 349312-04 for flange socket OUT of interface board
Drive side (Mot.Enc.EnDat) Signal Color PWM8 side (Pos.Enc.EnDat)
Flange socket 17-pin, male Flange socket 17-pin,
knurled coupling ring
PIN 16 Up sensor Blue PIN 1
n.c. PIN 2
n.c. PIN 3
PIN 15 0V sensor White PIN 4
PIN 8 Temp.+ Green PIN 5
PIN 9 Temp.- Brown PIN 6
PIN 10 Up Brown/green PIN 7
PIN 5 CLOCK+ Violet PIN 8
PIN 14 CLOCK- Yellow PIN 9
PIN 7 0V White/green PIN 10
PIN 17 Internal shield - PIN 11
PIN 11 B+ BLUE/BLACK PIN 12
PIN 12 B- RED/BLACK PIN 13
PIN 3 DATA+ GRAY PIN 14
PIN 1 A+ GREEN/BLACK PIN 15
PIN 2 A- YELLOW/BLACK PIN 16
PIN 13 DATA- PINK PIN 17