3 technical information – HEIDENHAIN iTNC 530 (340 49x-01) User Manual
Page 623
HEIDENHAIN iTNC 530
623
14.3 T
e
c
hnical Inf
o
rm
ation
14.3 Technical Information
Explanation of symbols
Standard
z
Axis option
Software option 1
Software option 2
User functions
Description
Basic version: 3 axes plus spindle
z
Fourth NC axis plus auxiliary axis
or
z
8 additional axes or 7 additional axes plus 2nd spindle
Digital current and speed control
Programming
HEIDENHAIN conversational format, with smarT.NC and as per ISO
Position entry
Nominal positions for line segments and arcs in Cartesian or polar coordinates
Absolute or incremental dimensions
Display and entry in mm or inches
Display of the handwheel path during machining with handwheel superimposition
Tool compensations
Tool radius in the working plane and tool length
Calculating the radius-compensated contour up to 99 blocks in advance (M120)
Three-dimensional tool-radius compensation for subsequent changing of tool data
without having to recalculate the program
Tool tables
Multiple tool tables with any number of tools
Cutting data tables
Cutting data tables for automatic calculation of spindle speed and feed rate from tool-
specific data (cutting speed, feed per tooth)
Constant cutting speed
With respect to the path of the tool center
With respect to the cutting edge
Background programming
Create one program with graphical support while another program is running.
3-D machining
(software option 2)
Motion control with minimum jerk
3-D compensation through surface normal vectors
Using the electronic handwheel to change the angle of the swivel head during program
run without affecting the position of the tool point (TCPM = Tool Center Point
Management)
Keeping the tool normal to the contour
Tool radius compensation normal to the direction of traverse and the tool direction
Spline interpolation
Rotary table machining
(software option 1)
Programming of cylindrical contours as if in two axes
Feed rate in length per minute