HEIDENHAIN iTNC 530 (340 49x-01) - Manual (Page 57)

HEIDENHAIN iTNC 530 57
2.2 Mo
ving the Mac
h
ine Ax
es
Moving the axes
Select the Electronic Handwheel operating mode.
Activate the handwheel: Press the handwheel key on
the HR 420. Now the TNC is operable only through
the HR 420. A pop-up window stating such appears
on the TNC screen.
If required, press and hold the permissive button
Use the handwheel to select the axis to be moved.
Select the additional axes via soft key
Move the active axis in the positive or negative
direction.
Deactivate the handwheel: Press the handwheel key
on the HR 420. Now the TNC can be operated
through the control panel
or