HEIDENHAIN SW 68894x-03 - Manual (Page 618)

618 Tables and overviews
9.3 T
e
c
hnical inf
o
rm
ation
9.3 Technical information
Specifications
Components  MC 6441, MC6542 or MC 7420 main computer with
 CC 61xx or UEC 11x controller unit
 15-inch or 19-inch TFT color flat-panel display
 TE 735T or TE 745T keyboard unit
Operating system  HEROS real-time operating system for machine control
Memory  1.8 GB (on CFR compact flash memory card) for NC programs
Input resolution and display step  X axis: 0.5 µm, diameter: 1 µm
 Z and Y axes: 1 µm
 U, V and W axes: 1 µm
 C and B axes: 0.001°
Interpolation  Straight line: In 2 principal axes, optional in 3 principal axes (max. ±100 m)
 Circle: in 2 axes (radius max. 999 m), optional additional linear
interpolation of the third axis
 C axis: Interpolation of the X and Z axes with the C axis
Feed rate  mm/min or mm/rev
 Constant surface speed
 Max. feed rate (60 000/pole pairs × ball screw pitch) at fPWM = 5000 Hz
Spindle  Maximum 60000 rpm (with 2 pole pairs)
Axis feedback control  Integrated digital drive control for synchronous and asynchronous
motors
 Position loop resolution: Signal period of the position encoder/1024
 Position control clock pulse: 0.2 ms
 Speed control clock pulse: 0.2 ms
 Current control: 0.1 ms
Error compensation  Linear and nonlinear axis error, backlash, reversal peaks during circular
movements
 Static friction
Data interfaces  1000 BaseT Gigabit Ethernet interface
 4x USB 3.0 on the rear, 1x USB 2.0 on the front
Diagnostics  Fast and simple troubleshooting through integrated diagnostic aids
Ambient temperature  Operation: 5 °C to 40 °C
 Storage: -20 °C to +60 °C